Epoxy Resin For Wood Table

 

  Epoxy resin for wooden table is also known as deep pour epoxy resin, it is a type of epoxy resin used for deep pour applications, typically for casting molds, river tables, and other large-scale projects. It is designed to cure slowly while creating a durable, glossy surface.

 

  Deep pour resin is formulated with a lower viscosity than traditional epoxy resins, allowing it to be poured at a depth of 2-4 inches without overheating or cracking. This slow cure time also allows for bubbles to rise to the surface and pop on their own, reducing the need for additional tools to remove air pockets.

 

  Epoxy resin is a great choice for coating and protecting a wood table. When applied properly, it can create a hard, durable, and glossy surface that enhances the natural beauty of the wood.

  To use epoxy resin for a wood table, follow these steps:

1. Prepare the wood surface by sanding it smooth and cleaning it thoroughly with a damp cloth.
2. Mix the epoxy resin according to the manufacturer's instructions, taking care to measure the components accurately.
3. Apply the resin to the wood surface using a brush or roller, making sure to spread it evenly and cover all areas.
4. Allow the resin to cure according to the manufacturer's instructions. This may take several hours or several days, depending on the type of resin used.
5. Sand the cured resin surface lightly with fine-grit sandpaper to remove any imperfections or rough spots.
6. Apply a second coat of resin if desired, following the same process as before.

 

  When working with epoxy resin, it is important to wear protective equipment such as gloves and a respirator, and work in a well-ventilated area. It is also recommended to work in a dust-free environment to prevent debris from getting into the resin.

 

There are two types three types of casting resin:

Types	Weight Ratio	Viscosity of A	Viscosity of B	Operation Time	Final Curing Time	Initial Curing Time	ShoreD
JQ31-7T	3:1	800cps	80cps	2h	36h	8h	83D
JQ31-9T	2:1	1000cps	1000cps	12h	48h	24h	82D
JQ31-9V	2:1	1000cps	200cps	16h	48h	24h	82D

Single maximum pouring thickness:

31 AB-7T: 1-3CM

31 AB-9T: 8-12CM

31 AB-9V: 15-18CM

 

Data Sheet

---

Part	JQ31A-9V	JQ31B-9V
Color	Transparent	Transparent
Specific gravity	1.15	0.97
Viscosity (25℃)	2000-4000 CPS	50MAXCPS
Mixing ratio	A:B=2:1(Weight Ratio)
Hardening conditions	25°C*48H-72H
Usable time	25°C*300min(100g)

Feature

---

  Our resin is self leveling, self degassing, low odor, Non-toxic (food safe) and no fumes,contains both a UV stabilizer and advanced additive resistant to yellowing, long lasting. Perfect for mica powder, deep resin molds,alcohol ink, resin pigment or river tables.

  2:1 Mixture Resin & Higher Hardness: easy to by volume ratio,resin A to hardener B is 2 :1.After curing, the hardness of this resin is higher, more heat resistant to prevent warping, more wear-resistant and not easy to break. Deep Pour Epoxy Resin Up To 2 Inch:JQ epoxy resin is able to fill gaps more than 2 inches thick at a time.Specially for epoxy resin wood filler applications,such as river bed, table side. Carefully and thoroughly avoiding forming bubbles, 45 minute work time, 48-72 hours cure time (according to your project)

 

Factory Equipment

---

  Hebei Linyuan Fine Chemical Co., Ltd. was established in January 2017, and it was funded and constructed by Hebei JingHong Electronic Technology Co., Ltd and its subsidiary Hongda Insulation Material Factory which specialize in the production of 3240 Epoxy Resin Board, FR4 Fiberglass Sheet, Phenolic Cotton Cloth Laminate Sheet 3026, phenolic paper board and copper clad laminate.

  JingHong had a factory before in Xiong'an New District, Hebei, which produced E44 epoxy resin only. The production volume was small and part of it was used for its own. Therefore, there was not much sales in the market. Due to the wide applications of epoxy resin, China has become the world's largest producer and consumer of epoxy resins. In order to comply with the market trend, the company combined the company's own situation, withdrew from Xiong'an New Area, and built an epoxy resin factory with an annual output of 20,000 tons in Cangzhou. The project has been completed and put into production.

  The project is designed with reference of Japan's Toto Kasei technology. The current production of epoxy resins include E44, E51, etc., and varieties will be gradually added according to market demand in the future. The person who take in charge of the company said: At present, the epoxy resin production capacity is 20,000 tons. According to the actual market situation, the production capacity is going to expand to 100,000 tons.

 

Packaging and Shipping

---