Epoxy Resin For Tabletop

  How to make kitchen countertops with epoxy resin glue？

 

  In recent years, epoxy resin glue has become more and more widely used in home decoration, especially in countertop encapsulation. Epoxy resin glue has the advantages of wear resistance, high temperature resistance, corrosion resistance, etc. It can effectively protect the countertop and extend its service life. So, how to seal the countertop with epoxy resin glue? The following will introduce it to you in detail.

 

  First, we need to prepare the required materials and tools. Materials include epoxy resin glue, hardener, pigments, etc. Tools include scrapers, sandpaper, brushes, etc. Ensure the quality of materials and tools is reliable to ensure the effect of sealing the tabletop.

 

  Next, we need to deal with the countertop. Clean the countertop first to make sure the surface is clean and dust-free. Then, sand the countertop to give it a smooth surface. This can increase the adhesion of the epoxy resin glue and ensure the effect of sealing the table surface.

 

  Then, we need to mix the epoxy resin glue and hardener in a certain proportion. According to the instructions provided by the manufacturer, mix the epoxy resin glue and hardener together in a certain proportion. Note that the mixture must be stirred evenly to avoid non-curing or incomplete curing.

 

  Next, we can add paint as needed. Pigments can make the color of epoxy resin glue richer and increase the beauty of the countertop. Choose the appropriate color according to personal preference, add the pigment to the mixed epoxy resin glue, and stir evenly again.

 

  Then we can start applying the epoxy glue. Use a spatula to spread the mixed epoxy glue evenly on the countertop. Note that the application should be even and careful to avoid uneven thickness. Multiple layers of epoxy glue can be applied as needed to increase the thickness and wear resistance of the countertop.

 

  Finally, we need to wait for the epoxy glue to cure. According to the instructions of the epoxy resin glue, wait for a certain amount of time to allow the epoxy resin glue to fully cure. The curing time is generally about 24 hours, and the specific time depends on the type and thickness of the epoxy resin glue.

 

  While waiting for curing, we need to pay attention to keeping the environment dry and ventilated. Avoid the influence of dust, water vapor, etc. on epoxy resin glue. At the same time, artificial contact and pressure must be avoided to avoid affecting the curing effect.

 

  After the epoxy resin glue has cured, we have completed the encapsulation of the countertop. At this time, the surface of the countertop will appear smooth and solid, with the advantages of wear resistance, high temperature resistance, and corrosion resistance. At the same time, epoxy resin glue can also effectively prevent problems such as moisture and deformation of the countertop, extending its service life.

 

  Epoxy resin for tabletop smooth, glass-like surface that is resistant to scratches, heat, and stains.

 

There are two types three types of casting resin:

Types	Weight Ratio	Viscosity of A	Viscosity of B	Operation Time	Final Curing Time	Initial Curing Time	ShoreD
JQ31-7T	3:1	800cps	80cps	2h	36h	8h	83D
JQ31-9T	2:1	1000cps	1000cps	12h	48h	24h	82D
JQ31-9V	2:1	1000cps	200cps	16h	48h	24h	82D

Single maximum pouring thickness:

31 AB-7T: 1-3CM

31 AB-9T: 8-12CM

31 AB-9V: 15-18CM

 

Data Sheet

---

Part	JQ31A-9V	JQ31B-9V
Color	Transparent	Transparent
Specific gravity	1.15	0.97
Viscosity (25℃)	2000-4000 CPS	50MAXCPS
Mixing ratio	A:B=2:1(Weight Ratio)
Hardening conditions	25°C*48H-72H
Usable time	25°C*300min(100g)

 

Factory Equipment

---

  Hebei Linyuan Fine Chemical Co., Ltd. was established in January 2017, and it was funded and constructed by Hebei JingHong Electronic Technology Co., Ltd and its subsidiary Hongda Insulation Material Factory which specialize in the production of 3240 Epoxy Resin Board, FR4 Fiberglass Sheet, Phenolic Cotton Cloth Laminate Sheet 3026, phenolic paper board and copper clad laminate.

  JingHong had a factory before in Xiong'an New District, Hebei, which produced E44 epoxy resin only. The production volume was small and part of it was used for its own. Therefore, there was not much sales in the market. Due to the wide applications of epoxy resin, China has become the world's largest producer and consumer of epoxy resins. In order to comply with the market trend, the company combined the company's own situation, withdrew from Xiong'an New Area, and built an epoxy resin factory with an annual output of 20,000 tons in Cangzhou. The project has been completed and put into production.

  The project is designed with reference of Japan's Toto Kasei technology. The current production of epoxy resins include E44, E51, etc., and varieties will be gradually added according to market demand in the future. The person who take in charge of the company said: At present, the epoxy resin production capacity is 20,000 tons. According to the actual market situation, the production capacity is going to expand to 100,000 tons.

 

Packaging and Shipping

---