Epoxy fiberglass winding tube performance characteristics and installation methods

Epoxy glass fiber wound tube performance characteristics:

  1. Safe and reliable ring stiffness Compared with pure plastic pipes, the reinforced steel strip can easily make pipes, especially large-diameter pipes, have sufficiently safe and reliable ring stiffness.

  2. The inner wall is smooth, and the flow resistance is 20 to 30% lower than that of cement pipes. The inner wall of polyethylene pipes is smooth, the friction coefficient is small, and sediments are not easy to accumulate in the pipe. The friction resistance is almost unchanged after long-term use.

  3. Flexible or leak-free connection, good sealing performance and environmental protection performance. Both sealing connection methods can be operated manually with simple tools without machinery. They are very simple and fast, achieving reliability and no leakage.

  4. Corrosion-resistant, with a service life of more than 50 years. The service life of high-density polyethylene pipes can be as long as 50 years.

  5. Light weight, few joints, no need for large equipment, easy installation and laying, light weight, no need for large lifting equipment during installation. It has good axial flexibility, has low requirements on the flatness and solidity of the trench bottom during laying, and has strong ability to withstand abnormal stress caused by improper installation.

  6. On-site production greatly saves transportation costs. The strip can be transported in reels. The pipe winding device is simple and compact, making it easy for manufacturers to transport the device to the vicinity of the construction site. The nearby winding production and supply of pipes greatly reduces the user's transportation costs.

  7. The pipe has strong resistance to abnormal sudden loads and can resolve the resulting stress through elastic deformation, preventing pipe joints from leaking or being damaged due to excessive stress and deformation.

  8. Comprehensive cost is competitive. It has two types: steel and plastic. Combining the advantages of the material, the pipe has excellent comprehensive performance.

Epoxy fiberglass winding tube usage and installation methods:

  The use and installation of epoxy fiberglass winding pipes can be divided into machine installation and manual installation. Machine installation requires equipment similar to the hose and water cloth winding machine.

Manual installation is briefly described below:

  1. Wrap the middle part of the hose (wires, cables) around the middle part of the epoxy fiberglass winding tube, starting from the wound middle part and winding towards one end of the hose (wires, cables).

  2. After winding one end of the hose (wires and cables), the epoxy fiberglass winding tube is positioned at the joint of the hose (wires and cables). After positioning, reverse the spiral protective sleeve and loosen it. You can move it freely and start to rotate from the wrapped middle part to the other end.

  3. Wrap both ends of the epoxy fiberglass winding tube around the outside of the hose (wires, cables), and the installation is complete.